Volunteers use 3D printers to make personal protective equipment during pandemic

Volunteers use 3D printers to make personal protective equipment during pandemic

TORONTO — Groups of volunteers across Canada are using 3D printers to produce personal protective equipment and other essential supplies at a breakneck speed — an effort some say could have a lasting impact even after the COVID-19 crisis passes.

These “makers” are volunteering their expertise, time and tools to produce gear used on the front lines of the fight against the pandemic, drawing on open-source designs and creating their own.

Kate Kazlovich, a PhD candidate in biomedical engineering, said she and a group of 3D-printing enthusiasts of varying backgrounds have joined the effort, producing face shields to protect front-line workers, ear guards to make N95 masks more bearable to wear for long periods, and notably, a connector that allows one ventilator to serve two patients.

“What is normally a standard, traditional research project that happens within the hospital walls was taken out and the community was able to contribute,” Kazlovich said.

While the ventilator connector was designed from the ground up, in partnership with the University Health Network as part of an open-source research project, the team has also worked to improve open-source designs that others have created.

“We’re trying to not go crazy on designs,” Kazlovich said. ”We do what is necessary and what is asked for.”

For instance, the team reworked the design for a headband that’s used with a face shield, drastically increasing the number they can produce at one time.

Marc Shu-Lutman, an industrial designer on the team, redesigned the band so that they’re printed in a stack, and can be easily detached from one another.

“It’s the same function. It’s the same band. But now, overnight, instead of getting two done, we can do 16,” he said.

After going through testing, the products are used in hospitals, long-term care homes and other front-line facilities, and the designs are posted online for anyone to draw from.

The team has been working remotely to adhere to physical distancing protocols, and has been volunteering their time, sometimes paying out-of-pocket for materials. They’re also accepting donations.

They say that while they understand their limitations — they can’t produce electronic equipment and don’t have a background in medical manufacturing — there are lessons that can be learned from this sort of community creation and carried beyond the current crisis.

“If that community lasts, you can see it being applied to other areas and other industries going forward. Obviously, (the pandemic) gives everybody a single direction at the moment. And that may change, but the next project could be something very, very different,” said James Wallace, another team member.

Mihaela Vlasea, an assistant professor at the University of Waterloo and associate research director at the Multi-Scale Additive Manufacturing Lab, said she also sees this experience shifting the manufacturing process going forward.

“I think that the most interesting outcome of this is going to be a shift from globalization to a more local response to the health-care sector needs,” she said.

“We’ve seen that in additive manufacturing where a lot of that supply chain has become really close to the hospital, which was not the case a few months ago. And I also see a lot of the grants and the research and industry sector trying to push for that localized response.”

Vlasea’s team is also 3D printing PPE, including face shields and, more recently, components for fitted face masks designed specifically for the wearer.

She said that in the last couple of weeks, they’ve moved beyond communicating directly with hospitals and are now sending the parts they’re manufacturing to companies that can assemble them.

But she notes that there are certain drawbacks to 3D printing — most significantly, an inability to scale projects up because additive manufacturing takes more time than more traditional techniques.

That doesn’t mean there’s no place for 3D printing in the traditional manufacturing landscape, though.

“We see companies coming in to request injection moulds manufactured via additives so that they can actually scale up production using a more traditional manufacturing approach,” she said.

During the pandemic, the federal government has called on companies and organizations that don’t typically make medical supplies to join the cause. But Health Canada has also cautioned that there are certain standards that need to be met.

“While Health Canada supports efforts to increase the availability of PPEs for front-line health workers, organizations should be aware that the manufacture of medical devices sold in Canada have technical considerations to ensure that they are safe, effective and of high quality and must meet certain regulatory standards,” the department said.

This report by The Canadian Press was first published April 26, 2020.

Nicole Thompson, The Canadian Press

Coronavirus

Get local stories you won't find anywhere else right to your inbox.
Sign up here

Just Posted

Front-line hospital workers have walked off the job at the Rimbey Hospital, and across the province. Photo Submitted
Front-line health care workers on strike across the province, including Rimbey Hospital

The strike is due to cut of 11,000 health care jobs in the province, according to AUPE

Alberta’s chief medical officer of health, Dr. Deena Hinshaw, confirmed more than 1,000 cases over the weekend Monday afternoon. File photo
COVID-19: Central zone active cases up Monday

‘We’ve now crossed the tipping point,’ says Hinshaw

Alberta has 3,651 active cases of COVID-19. (File photo)
432 new COVID cases sets another record Friday

Central zone holds steady at 126 active cases

Ma & Paws Pet Supplies. Facebook/ Ma & Paws Pet Supplies.
Rimbey residents petition for dog park

Request for approval of dog park will be brought up at Tuesday Oct. 27 Town Council meeting.

The future site of the Rimbey Travel Centre. Web photo
New Rimbey development aims to capitalize on highway traffic

Phase I of the Rimbey Travel Centre would be along Hwy. 20, if approved

Wetaskiwin Hospital staff join AUPE walk outs across the province Monday Oct. 26, 2020. Shaela Dansereau/ The Pipestone Flyer.
City of Wetaskiwin health-care workers strike in protest of province-wide cuts

Wetaskiwin Hospital staff join other front line hospital workers across the province in walk-outs.

The death of 19-year-old Jacob Michael Chitze of Edmonton has now been ruled a homicide following an ongoing RCMP investigation.
UPDATE: RCMP arrest youth for second degree murder of 19-year-old Jacob Chitze

Arrest made for the murder of Jacob Michael Chitze, 19.

Pumpkins for the 46th Annual WDACS Pumpkin Ball on display at Vision Credit Union Wetaskiwin. Shaela Dansereau/ Pipestone Flyer.
46th Annual Pumpkin Ball held virtually this year

This year the pumpkins were sold over a six-day online auction.

Comedic actor Seth Rogen, right, and business partner Evan Goldberg pose in this undated handout photo. When actor Seth Rogen was growing up and smoking cannabis in Vancouver, he recalls there was a constant cloud of shame around the substance that still lingers. Rogen is determined to change that. (Maarten de Boer ohoto)
Seth Rogen talks about fighting cannabis stigma, why pot should be as accepted as beer

‘I smoke weed all day and every day and have for 20 years’

Leader of the Opposition Erin O’Toole rises during Question Period in the House of Commons Thursday October 22, 2020 in Ottawa. THE CANADIAN PRESS/Adrian Wyld
O’Toole tells Alberta UCP AGM Liberals were ‘late and confused’ on COVID response

He says Alberta Premier Jason Kenney has taken charge and not waited to make things happen

Alberta Premier Jason Kenney arrives for an announcement at a news conference in Calgary, Alta., Tuesday, Sept. 15, 2020. THE CANADIAN PRESS/Todd Korol
Inquiry into oil and gas foes to deliver report next year: Kenney

A lawsuit filed by environmental law firm Ecojustice argues the inquiry is politically motivated

The Canadian border is pictured at the Peace Arch Canada/USA border crossing in Surrey, B.C. Friday, March 20, 2020. More than 4.6 million people have arrived in Canada since the border closed last March and fewer than one-quarter of them were ordered to quarantine while the rest were deemed “essential” and exempted from quarantining. THE CANADIAN PRESS/Jonathan Hayward
Majority of international travellers since March deemed ‘essential’, avoid quarantine

As of Oct. 20, 3.5 million travellers had been deemed essential, and another 1.1 million were considered non-essential

This photo provided by Air Force Reserve shows a sky view of Hurricane Epsilon taken by Air Force Reserve hurricane hunter team over the Atlantic Ocean taken Wednesday, Oct. 21, 2020.   Epsilon’s maximum sustained winds have dropped slightly as it prepares to sideswipe Bermuda on a path over the Atlantic Ocean.  The National Hurricane Center says it should come close enough Thursday, Oct. 22, evening to merit a tropical storm warning for the island.  (Air Force Reserve via AP)
Hurricane Epsilon expected to remain offshore but will push waves at Atlantic Canada

Epsilon is not expected to have any real impact on land

Most Read